|
Neoprene Sheet - Type # 90 |
Rubber Roll Matting - Type # 86 |
| Features |
Features |
- Commercial grade Neoprene
- Plate Finish
- Moderate all and ozone
resistant properties
|
- Used as floor runner, protector
- Bottom side plate finish
|
| Neoprene
Diaphragm Sheet - Type # 88 |
Nitrile
Sheet Buna N - Type # 93 |
| Features |
Features |
- Plate Finish
- Insertion:
Nylon 14.5 oz.
- Mullen burst test rating over
1000psi with 1" square
opening
- For applications requiring more fabric
strength the
Neoprene CI
|
- Plate Finish
- For use in applications requiring
a highly oil-resistant material
|
| SBR
CI Sheet - Type # 96 |
Neoprene
CI Sheet - Type # 87 |
| Features |
Features |
- Plate Finish
- Cotton inserted
- For general use where a fabric
reinforced rubber is required
|
- Plate Finish
- Cotton inserted
- For general use where an oil
resistant reinforced rubber is required
|
| Red
Rubber Sheet - Type # 95 |
Tan
Pure Gum Sheet - Type # 97 |
| Features |
Features |
- Plate Finish
- For general gasket applications
with no oil-resistant requirements
|
- Plate Finish
- Non-floating stock
- A soft abrasion resistant
sheet rubber
- Meets FDA requirements
|
| White
Nitrile Sheet - Type # 95 |
EPDM
Sheet - Type # 97 |
| Features |
Features |
- Plate Finish
- For applications where FDA
requirements and good oil resistance
are needed
- Non-marking
|
- Plate Finish
- For applications requiring
high temperature, good ozone,
non-oil resistance
- Peroxide cured
|
