| Unaflex® produces and
inventories more styles and sizes of Expansion Joints than any other
company in the world.
We have become known as the "PROBLEM SOLVERS" when
it comes to Expansion Joint applications. |
 |
Style 150
- The heavy duty proven
"industry work horse"
- Time tested performer
- Fabric and steel
reinforced
- Constructed for maximum
strength and reliability.
- Available in multi-arch,
taper, offset and special constrictions
- For pressure and vacuum
|
 |
Style 1000
- Heavy duty
- Double arc movement with single wide
arch
- reduced movement forces
- Fabric and steel reinforced
- Suitable for pressures up to 200 PSI
and vacuum service
- Available in multi-arch, offset and
special constructions
|
 |
Style 189
- Lightweight construction
- Low spring rate forces
- Can be built to handle
temperatures up to 350ºF
- Less force to move;
allows maximum movements
- Available in multi-arch,
taper, offset and for high temperature applications
|
 |
Style 200 (XL)
- Extra - reinforced carcass
- For pressures to 300 PSI
- Available in high temperature
constructions suitable for temperatures to 400ºF
- Available in multiple arch, taper,
offset and special constructions
|
 |
"Super-Flex" 1200
- Molded Wide Arch Design
- Greater Motion From Wider Arch
- Less Force to Compress
- Standard 150lb. ANSIB 16.1 Flange
Drilling
- Standard Face to Face Dimensions
- Vacuum 26" Hg.
|
 |
Dura-Perm
- The excellent chemical resistance of Teflon combined with the flexibility of rubber
- Thermal stability
- Anti-stick properties
- Available in multiple arch, taper, offset and special constructions
|
 |
"Radi-Flex" Elbow Expansion Joint
- Designed to reduce noise and
vibration
- Flexibility prevents damage
- Spiraled steel wire embedded from
flange to flange for extra strength.
|
 |
Style 600
- Designed to absorb thermal movements
and sound vibrations
- Liners and insulation can allow
temperatures to 500ºF
- Available in multiple arch, taper,
offset and special constructions
- Custom Drilled or un-drilled
|
 |
"Super-Quiet" Vibration and Sound AbsorbersStyles 3150 & 3250
- Designed
with molded rubber flanged ends with bolt holes that accommodate
standard steel flanges. They are furnished with or without helical
wire reinforcement. Special tubes can be compounded to meet unique
service conditions in either suction or discharge applications.
|
 |
Styles 2150 & 2250
- Specially
designed lengths of rubber pipe with factory attached ferrules for
pipes and other connections involving standard IPT. They eliminate
vibration between pump and pipe line either for suction or discharge.
|
 |
Style 1100
- Heavy duty
- Self-Flushing
- Highly resistant to chemical and
abrasion
- Available in a wide variety of
elastomers
- Suitable for Vacuum service to 26"
mercury
|
 |
Style 800
- Minimizes water hammer
and hydraulic shock
- Less force to move;
allows maximum movements
- "All-in-one" design
eliminates the need for retaining rings
- Also available in two
arch design (Twin-Sphere) for greater movement capabilities
|
 |
Style 802
- Available to 20" Diameter
The twin-sphere 802 comes with steel 150lb. ASA drilled
flanges, which float to provide easy installation and center root ring
to meet PSI shown
|
 |
Style 803
- Highly Capable
- Low cost
- Smaller diameter piping
system
- Power plants
- Chemical plants
- Water works
- Sewage
|
 |
Sign Up for Unaflex Rubber Expansion Joint Alerts!
|
