Ordering and Sales Contact Information

Terms, Conditions & Ordering Considerations:

When ordering couplers, it is the responsibility of the end user to specify the basic metal of the coupler and/or adapter and the gasket material, based on his/her knowledge of the solvent or corrosive characteristics, and the temperature and pressure of the vapor or liquid with which the basic metal of the coupler and or adapter and gaskets will be in contact.

Couplers must be used with a properly maintained and non-deteriorated gasket in order to function properly. Atlantic international Coupling Company strongly recommends the use of Atlantic International Coupling Company gaskets. Atlantic International Coupling Company specifically disclaims any responsibility for damage or injury when couplers are used without regard to the corrosive characteristics of the material with which the coupler is being used, and without properly maintained or deteriorated gasket. The Atlantic International Coupling, when properly maintained and used with properly maintained and non-deteriorated gasket, will provide a tight connection under reasonable and foreseeable conditions. Improper maintenance or use, or use with an improper or deteriorated gasket, can result in damage or injury.

Contact the factory if you have any questions regarding the efficient and safe use of our couplings.

A
AIC Product

20
Size

C
Style/Part

XX
Material
(AL-SS-CB)

sample product choice

5=1/2"
7=3/4"
10=1"
12=1-1/4"
15=1-1/2"
20=2"
25=2-1/2"
30=3"
40=4"
50=5"
60=6"

If the coupler is an increaser/reducer, the coupler is the first size shown in the part number. (e.g. A1520BAAL is a 1-1/2"coupler with a 2" adapter). All other parts are designed by Cam and Groove part first, then the attachment method.


Valid XHTML 1.0 Transitional